-40%
TROY BILT HORSE TILLER KOHLER ENGINE REPLACEMENT 7HP COMMERCIAL 3 YEAR WARRANTY
TROY BILT HORSE TILLER KOHLER ENGINE REPLACEMENT 7HP COMMERCIAL 3 YEAR WARRANTY

TROY BILT HORSE TILLER KOHLER ENGINE REPLACEMENT 7HP COMMERCIAL 3 YEAR WARRANTY

$ 168.93

Availability: 100 in stock
  • Fuel Type: Gasoline
  • Model: CH270
  • California Prop 65 Warning: California Proposition 65 requires businesses to provide warnings to Californians about significant exposure to chemicals that cause cancer, birth defects, or other reproductive harm. Add details about the warning you want to show California buyers. We'll add a warning symbol and the word 'WARNING:' before the description you enter here, and we’ll add 'For more information go to www.P65Warnings.ca.gov' following your description.
  • Horsepower: 7hp
  • Battery Included: No
  • Type: GASOLINE ENGINE
  • Item must be returned within: 30 Days
  • Engine Type: 4-Stroke
  • Power: gas
  • MPN: CH270
  • Crankshaft Direction: Horizontal
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Assembly Required: Yes
  • Brand: Kohler
  • Power Source: Gas
  • Engine Size: 7 HP

    Description

    KOHLER CH270 PRO-SERIES ENGINE IS A DIRECT BOLT ON REPLACEMENT FOR TROY BILT HORSE TILLERS, CRANKSHAFT 3/4" DIAMETER, 2 7/16" LONG CRANKSHAFT, STRAIGHT KEY WAY 3/16", 4 BOLT PATTERN ON OIL PAN IS 2.56" X 2.56",  THIS ENGINE WILL REPLACE BRIGGS AND STRATTON, TECUMSEH, KOHLER ENGINES THAT HAVE BEEN USED ON TROY BILT HORSE TILLERS.
    NOTE: THIS ENGINE HAS ONLY ONE SHAFT, IT DOES NOT HAVE THE SHAFT FOR REVERSE, THOSE ENGINES ARE NO LONGER AVILIABLE
    ENGINE SPECS:
    User-Friendly Maintenance.
    Industry standard PTO face
    Dual oil fills and drains
    No tools required all season air cleaner
    Easy access throttle, choke and shutoff
    Oil Sentry™ automatic low oil engine shutdown system
    Carburetor bowl drain
    High Power Performance.
    Overhead valve design
    Large displacement
    High-inertia flywheel
    Extended Run Times.
    Large metal fuel tank
    Swirl induction combustion chamber
    Quiet, Smooth Operation.
    Oversized muffler with heat shield
    Mechanical governor
    Sound-deadening alloy crankcase
    Silenced air intake
    Easy Dependable Starts.
    Electronic ignition system
    Automatic compression release
    Dual ball bearings
    Indexable, easy pull recoil starter
    Reliability and Long Life Design.
    Quad-Clean™ heavy-duty cyclonic air cleaner
    Warm air intake system for cold weather operation
    Cast iron cylinder bore
    Steel-forged crankshaft
    Stellite-faced exhaust valve
    Water trap to separate moisture in fuel
    3 fuel filters: fill neck, in tank, and carburetor inlet
    3 year commercial warranty
    Model
    Command PRO® CH270
    J1940 Power hp(kW)
    1
    7 (5.2)
    Displacement cu in (cc)
    12.7 (208)
    Bore in (mm)
    2.8 (70)
    Stroke in (mm)
    2.1 (54)
    Peak Torque lbs. ft (Nm)
    10.5 (14.2)
    Compression Ratio
    8.5:1
    Dry Weight lbs (kg)
    38.7 (17.5)
    Oil Capacity U.S. quarts (L)
    0.63 (0.6)
    Lubrication
    Splash
    Dimensions L x W x H in
    12.7 x 15.2 x 14.2
    Backpressure Limit
    2
    30
    J1995 Power hp (kW)
    3
    6.6 (4.9)
    J1995 Rated Speed (RPM)
    4000