3 Coin Ring Tools Double Sided Reduction Dies 1.0" to 1.5" @ 17°

Description

This is a set of 3 doubled sided reduction, fold over dies. Total of 6 different sizes that range from approximately 1.0 inch up to 1.5 inch machined at 17 degrees. Also included are 2 press plates. One press plate is 1.75 inches the other is 1.5 inch in diameter.
With my reduction dies the 1.0 inch is machined so the quarter dollar fits flush with the top of the die. The same is for the 1.1 it fits the presidential dollar flush with the top. The 1.2 inch is for half silver dollar. The 1.5 is for the silver dollar. Both which fit flush with the top making it easier to start the fold over process. Auction is for 3 dies and 2 press plates only. No coins included.
I have these dies available in 17 degree with a lip at the top of the die to hold the coin flat during the first part of the folding process in another auction.
I have over 100 different auctions, to see all my tools do a search for seller:mikestilltools
NOTE
:
All
my
tools
are
made
to
order
in
my
shop
at
my
house.
Mikestilltools